SI TECH Multi-Wing Drysuit Inflation Hose
- Multi-winged collar makes connect and disconnect easier, even with heavy gloves
- OEM low pressure heavy-duty rubber inflation hose by SI TECH
- Maximum compatibility with International post on SI TECH and Apeks brand drysuit inflation valves
SI TECH Multi-Wing Drysuit Inflation Hose
This heavy-duty rubber OEM hose from SI TECH has a standard UNF 3/8-inch male fitting that connects to the low-pressure port of the first stage and Multi-Wing collar female fitting that connects to the standard International (aka Schrader) nipple commonly seen on drysuits in recreational diving. The multi-winged collar makes connect and disconnect easier, even with heavy gloves. Available in { 32 in | 80 cm } and { 36 in | 90 cm } lengths.
| Brand | SI TECH |
|---|---|
| SKU | SI-32510-x |
Customer Reviews
WARNING
Keep in mind that all SCUBA hoses will fail sooner or later either due to age, storage conditions or handling. Scuba hoses, regardless of brand and materials, require some minimal care. Do not allow hoses to receive prolonged exposure sunlight, as the heat and UV from strong sunlight will significantly shorten the life of the hose. Do not attempt to flush the inside of the hose with any form of solvent or other chemical, new hoses are factory clean and if you have any reason to think they are no longer clean then the hose should be replaced. Prior to every dive trip you should always pressurize and inspect your hoses for mechanical damage, corroded fittings, bulges and leaks. Dive Gear Express suggests replacing all SCUBA hoses every five years or 500 dives, whichever comes first.