The Streamlined Openwater XT Regulator Package for single tank divers is a Dive Rite XT1 or FT1 first stage, in DIN or YOKE, and two Dive Rite XT2 second stages together with our DGX premium accessories. The package comes configured with DGX premium double braided flex or rubber hoses and also includes a DIN-to-Yoke spin-on adapter, a DIN regulator cap, and is Nitrox Ready.

Included with this Package:

• One Dive Rite XT1 First Stage, in DIN
• Two Dive Rite XT2 Second Stages
• One { 40 in | 1.0 m } Reg Hose for the primary, hose swivel
• One { 22 in | 56 cm } Reg Hose for the secondary
• One { 22 in | 56 cm } BC Inflator Hose
• One "Thin" SPG with { 26 in | 66 cm } HP Hose
• DIN to Yoke Spin-On Adapter, Necklace, S/S Bolt Snap, DIN Cap

All hoses for the regulator are in your choice of rubber or braided flex. The primary second stage is on a { 40 in | 1.0 m } hose with an underarm swivel, and the backup second stage is on a { 22 in | 57 cm } hose with a necklace. The thin SPG, in your choice of PSI or BAR, is on a { 26 in | 66 cm } HP hose with a S/S snap, and a { 22 in | 57 cm } inflator hose is also included. The package comes completely assembled by Dive Gear Express with our premium accessories and is ready to dive anywhere in the world.

The Dive Rite XT1 First Stage is a balanced diaphragm design featuring five standard size low pressure 3/8-inch ports on a swiveling turret, and two standard size high pressure 7/16-inch ports. The first stage is environmentally sealed for cold water performance, and comes standard with a 300-BAR DIN connector.

The Dive Rite XT2 Second Stage is pneumatically balanced for excellent breathing at any depth. Internally it contains Teflon parts for cold water performance. A user adjustable breathing resistance knob is also featured, with a venturi (Dive / Pre-Dive) switch for better flow control when needed and to reduce free flow upon initial entry.

The manufacturers recommended service interval is every two years or one hundred dives.