DGX Custom - DGX Gears D6 Streamlined OW Reg Package
- Assembled, tested and shipped to you ready-to-dive
- High performance balanced diaphragm design
- Salt, Fresh, Warm or Cold Water and Nitrox Ready
- DIN or Yoke - dive anywhere in the world
- Excellent quality, performance and value!
DGX Custom - DGX Gears D6 Streamlined OW Reg Package
The Streamlined Openwater Regulator Package for single tank divers is a DGX Gears D6 DIN first stage, and two DGX Gears D6 second stages together with our DGX premium accessories. The package comes configured with DGX premium double braided flex or rubber hoses and also includes a DIN-to-Yoke spin-on adapter, a DIN regulator cap, and is Nitrox Ready.
Included with this Package:
- One DGX Gears D6 First Stage and Two DGX Gears D6 Second Stages
- One { 40 in | 1.0 m } Reg Hose for the primary, plus swivel
- One { 22 in | 56 cm } Reg Hose for the secondary
- One { 22 in | 56 cm } BC Inflator Hose
- One "Thin" SPG with { 26 in | 66 cm } HP Hose
- DIN to Yoke Spin-On Adapter, Necklace, S/S Bolt Snap, DIN Cap
All hoses for the regulator are in your choice of rubber or braided flex. The primary second stage is on a { 40 in | 1.0 m } hose with an underarm swivel, and the backup second stage is on a { 22 in | 57 cm } hose with a necklace. The thin SPG, in your choice of PSI or BAR, is on a { 26 in | 66 cm } HP hose with a S/S snap, and a { 22 in | 57 cm } inflator hose is also included. The package comes completely assembled by Dive Gear Express with our premium accessories and is ready to dive anywhere in the world.
The DGX Gears D6 First Stage is a balanced diaphragm design featuring five standard size low pressure 3/8-inch ports on a swiveling turret, and two standard size high pressure 7/16-inch ports. The first stage is environmentally sealed for cold water performance, and comes standard with a 300-BAR DIN connector.
The DGX Gears D6 Second Stage is pneumatically balanced for excellent breathing at any depth. Internally it contains a chrome plated brass air barrel for performance and durability. The black soft touch silicone front cover allows for easy purge. A user adjustable breathing resistance knob is also featured, with a venturi (Dive / Pre-Dive) switch for better flow control when needed and to reduce free flow upon initial entry.
Our recommended service interval is every two years or one hundred dives. There is nothing unique about the DGX regulators in terms of service requirements and needs no special tools beyond those generic tools found on the typical regulator technicians bench. We sell the DGX Gears D6 service parts kits direct to the public.
| Brand | DGX Gears |
|---|---|
| SKU | PK-741003 |
| Weight | 7.500000 |
Customer Reviews
YOU MAY ALSO BE INTERESTED IN THE FOLLOWING PRODUCT(S)
Backup Second Stages
Traditionally, the backup second stage regulator has been a lower-performance lower-cost unbalanced design because it was thought to be less likely to free flow and less prone to problems. However, experience has demonstrated concerns with using a lower performance regulator under conditions that forced a switch to the backup, and most experienced divers are now choosing identical high-performance backup and primary regulators. Our high-performance balanced second stages are very resistant to free flow when it has the venturi setting on pre-dive and the adjustment knob set low. Field experience has shown our regulators to be quite trouble-free as well.
